Show Control Software

Dear Sirs,

Please, I need to know how I can work with a piece o video during the coreography?

Have you the possibility in adding a time line with an integrated viewer for pieces of video (raw/pre-mixed/edited) or a complete piece of vídeo to work with the sound time line (or linked), to create a multimedia (video+sound+light+other effects) coreography?

Anyone can tell me if exists some solution for working with VenueMagic or without?

Interesting software.

Best Regards
Luis

The VenueMagic video feature will be released next week. It will give you a single video track and support multiple monitors.

Dear Sir,

Thank you for you reply.

Without compromise:
About the video timeline, could you assign a DMX address for the video output? We use many channels of video for multiple projectors: Channel(timeline) #1 > video projector #1 ; channel (timeline) #2, video projector 2#, etc...

Today, the DJ's also want video in their performances as a complex multimedia shows.

I do not want to disturb your strategic direction for development.

Best Regards
Luis

I'm guessing that what you're asking for is the ability to output different videos on multiple monitors using mutiple video tracks on a VenueMagic timeline. VenueMagic DMX+AV, which will be released next week allows only one video track per timeline that can output to one screen. However, you could run multiple timelines simultaneously, each with its own video track outputting to a different monitor.

I'm not sure what you mean by assigning a DMX address to a video output unless you have a DMX controlled video player. If that is the case, then the current release will handle that just fine.

Dear Sir,

Many thanks again.

Yes, I think that it is.
I will show your software to our team.

Please, tell me if this software works with USM2DMX JMS cable or if you advise other inexpensive and good interface.

Best Regards
Luis

We do not currently support USB2DMX JMS. Look under Support->Supported Interfaces to see a list of USB DMX interfaces we support. The least expensive would be the VM-USBDMX-01 or the Enttec Open USB. Where are you located?